เOur Homogeneous Moulded ESD Mats and Tubesis homogeneous moulded within the rubber/silicon mixture before the shape moulding process. Intact Pacific can control and guarantee a steady resistivity of 105 -10 9 Ω, which would not vary with time and usage.
3 important things to know before choosing ESD Mats and Tubes
- If “ESD” protection is specified in the product, the standard ESD that are required will be a steady resistivity of 105 -10 9 Ω.
- Get the right material that is suitable for your work. Different material is served different purpose of the work environment e.g. work temperature, hardness and so on.
- JIS A is the hardness measurement standard that are widely used for determining the characteristics of rubber. The range of hardness is between 40-75 JIS A and can be adjusted upon the customer specification.
Please refer to the following table to choose the right material for your ESD mats and tubes.
| Material | BSR Silicone | NBR | EPDM | FKM VITON |
|---|---|---|---|---|
| Hardness | 40-75 JIS A | 60-75 JIS A | 60-75 JIS A | 65-70 JIS A |
| Operating temperature | -50 to +200 °C | -25 to +180 °C | -25 to +200 °C | -25 to +250 °C |
Homogeneous molded ESD Mats
| Product photo | Model no. | XAxis (mm.) | YAxis (mm.) | Thickness (mm.) |
|---|---|---|---|---|
| ERM-050 | 400 | 400 | 0.5 | |
| ERM-100 | 400 | 400 | 1.0 | |
| ERM-300 | 400 | 400 | 3.0 |
Homogeneous molded ESD Tubes
| Product photo | Model no. | ID (mm.) | OD (mm.) | Available material |
|---|---|---|---|---|
| SRT 4X6 mm. | 4 | 6 | BSR silicone | |
| SRT 2X4 mm. | 2 | 4 | BSR silicone |